Patterned paper 2.5 x 5 inches and 5.25 x 5.5 inches
Cricut cut bow tie - Artiste 0.80 inches, page 55, accent 3 (#M3B8BO for the Cricut Design Space)
Cricut cut name badge - Artbooking, page 68, icon both non-shift and shift 2.25 inches (width) x 1.62 inches (height) (#M447AB will import both base and badge together into Design Space)
Name badge: Import the image into Design Space and size as indicated. Unattach the layers. Using the Hide Contour feature, hide the letters H E L L O. Then, using a text box, replace them with the letters H A P P Y. I used the Art Philosophy font, but you could use your favorite. Size the text box to fit on the badge layer and ATTACH them. If you are not working with Design Space, you can do the same thing in the Cricut Craft Room. I then used the Artbooking font in another text box and the WRITE function to print 'birthday' on the badge base. Again, size to fit and attach. (I LOVE the write function on the Explore, especially since I have acquired pens that work well) You could use an appropriately sized stamp if not using the Explore.)
Fold the smaller piece of patterned paper in half lengthwise and adhere Fold the top edge back from the non folded corner to 1 7/8 inches from the bottom. Do not completely flatten the fold. Adhere the folded section. Trim off the part that sticks out.
Fold back 1.75 inches lengthwise on the larger piece and adhere. Fold this piece from the inside corner of the fold to 2 inches from the bottom. Do not completely flatten the fold. Adhere it just at the corner. Adhere the smaller piece to the left side of the card base, then adhere the larger piece, matching it to the right side of the base. There should be about a 1/2 inch overlap.
Assemble the bow tie and name badge and adhere them and the buttons.